Boasting some impressive features, the ZJ Longarm Kit is a comprehensive package including everything needed for a great suspension lift while maintaining the vehicle's crucial center of gravity. The kit includes adjustable high-clearance X-Flex upper and lower control arms with Clevite bushings, featuring rebuildable X-Flex joints with Adjustable Retainer Rings allowing you to preload bushings by compressing them prior to install. This lift kit features high-clearance components with a front y-link and rear 4-link control arm design. This promotes extreme axle flex while keeping pinion angles optimized
FEATURES
- Aggressive appearance
- Increased ground clearance
- HD 0.25" thick crossmember
- Lower control arms feature high clearance design
- Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability
- Extreme travel long arms keep optimum alignment and give optimum articulation.
- X-Flex control arm features:
- Clevite brand OEM style rubber bushings.
- Flex joints are fully rebuildable.
- Flex joints feature a massive 2.5" diameter body and 1.25" thread.
- Fully greasable.
- Adjustable retainer ring.
- Upper joints pivot up to 20 degrees.
- Lower joints pivot up to 35 degrees.
NOTES
- IMPORTANT
- Does NOT fit AWD models.
- Transfer case skid plate will NOT fit models equipped with 249 transfer case.
- Exhaust will have to be cut and rerouted to make sure it is away from the moving components.
- Models equipped with a CV style front driveshaft may result in driveshaft vibration. If this occurs, replacing the driveshaft, axle yoke and / or transfer case yoke will need to be performed to rid the vehicle of driveline vibration.
FRONT
- Lifted coil springs
- Adjustable upper control arms
- Adjustable lower control arms
- Crossmember
- Transfer case skid plate
- Sway-bar quick disconnects
- Forged Adjustable track bar
- Track bar bracket
- 3" Bumpstops
- Hardware
REAR
- Lifted coil springs
- Adjustable upper control arms
- Adjustable lower control arms
- Long arm frame brackets
- Track bar bracket
- Bumpstop brackets
- Brake line brackets
- Hardware
SHOCKS
SKU |
90222 |
Est. Install Time |
8-9 hours |
Recommended Tire Size |
31x10.50 R15 |
Recommended Wheel Backspacing |
Factory |
1993-1998 |
4WD |
Jeep |
Grand Cherokee ZJ |
Does NOT fit AWD models |
Write the First Review!