BDS Suspension Upper Control Arm (UCA) Kit for 10-18 Toyota 4Runner & 07-14 FJ Cruiser

These UCAs are designed for improved strength, great looks, and more wheel travel on leveled and lifted for the 4Runner or FJ Cruiser.

These performance control arms are built from high strength 1.5" OD x .120-wall tubing, fully welded for strength and durability. They use an indexed ball joint cup to correct the ball joint positioning for use with leveling kits and most full IFS lift kits on the market. The frame mounting ends feature durometer-specific rubber bushings. At the other end they use an indexed ball joint cup with and premium Moog brand ball joints for smooth, quiet operation and superior durability to arms that feature uniballs, poly bushings or heims. These control arms come finished in a durable black powdercoat and include a billet aluminum machined ball joint dust cap as well as proper brake line attachment points to ensure a factory-like fit. The control arms come fully assembled for easy install right out of the box.

Features:

• 1-1/2" DOM tubular construction
• Indexed ball joint cup for more wheel travel
• Quiet operation, superior corrosion resistance
• Serviceable ball joint
• Fully assembled, ready to bolt in

Product Notes:

• 1. Arms are designed to work with Fox Coilovers that require upper control arms and may not work with all aftermarket spacer lifts / lift kits. The ball joint angle has been indexed to allow for max range of motion with 2" lifts. If the upper ball joint is unable to be connected without preloading the suspension, a different spacer lift is recommended that will not over-droop the suspension system.
• 2. Ball joint cap must be removed for maintenance of ball joint. Remove cap to access grease zerk. Grease at regular maintenance intervals.
• 3. UCAs are designed to work with 2-3" of lift, and are not recommended for 0" of lift